Raven SBGuidance Disc, Installation Manual

Page: 38 / 50

Page 38/50 I SBG-Disc CAN-EN-Rev. A
SBGuidance Disc I Rev. A I CAN
(Implement)”. Then click Connect (
Figure 28
).
Go to the tab page MyPartners (
Figure 29
). On
Implement Controller, select “SBGuidance” and
click on “Add”. This will open the set-up screen
for the CAN disc controller (
Figure 30
).
The steering controller is recognized if the
status is on Running, if an SW Version is
displayed and the correct type of STU is
detected. In addition, a sensor value should be
displayed and a yellow line should be visible in
the graphic display. The sensor value should
change when the steering controller is used.
Check if the STU is recognized before you
continue to set up and calibrate the disc
control.
Figure 29 MyPartners