Raven ISO Product Controller II, Operation Manual

Page: 66 / 138

C
HAPTER
7
56 ISO Product Controller II and Hawkeye Operation Manual
Program Version. The version of software loaded on each nozzle. This information may be helpful to
troubleshoot individual nozzles or to ensure proper operation of the nozzle control system.
CAN Address. The unique identifier assigned to each nozzle for communicating on the nozzle system is displayed
on the diagnostics prompt.
Offline Count. Offline Count indicates the number of times the NCV stopped communicating. This number resets
when the power PCII ECU power cycles.
Flow Offset Enable (Wheel Tracks). Check this box to increase the flow rate of any two nozzles anywhere on the
boom to achieve optimal coverage in the turbulent air conditions behind vehicle wheels. The offset percentage
compared to the rest of the nozzles is set in the upper diagnostics window (Nozzle Flow Offset%). The
maximum offset is 30%.
Override NCV Off. Select Override NCV Off to override the NCV off.