Raven AutoBoom Willmar Eagle 8500, Installation Manual, Page: 59 / 82

5
Manual No. 016-0230-014 53
UltraGlide
Install Fittings on the AutoBoom Valve
Before mounting the AutoBoom valve on the machine, install the proper fittings in the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following
table to install the fittings in the appropriate ports of the AutoBoom valve.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material from being
introduced into the machine’s hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valve.
NOTICE
The appearance of the AutoBoom hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Fitting Part Number Port
Fitting - 9/16” JIC (M) to 9/16” SAE O-Ring (M) Straight Adapter 333-0012-045
LC, RC
LV, RV
Fitting - 3/4” SAE O-Ring (M) to 3/4” JIC (M) Straight Adapter 333-0012-093 P, T
Fitting - 7/16” JIC (M) to 3/4” SAE O-Ring (M) Straight Adapter 333-0012-044 LSP