EN
Page 72 of 91
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Enable/disable the lock function for
caliper arm in position.
It allows you to change the unit of
measure of the distance of the weights
fitting point from mm to inches and
vice versa.
Enable/disable the LED-light.
Enable/disable the dynamic residues
in the ECO-WEIGHT function.
Enable/disable the functions of motor-
cycle wheel balancing.
Enable/disable the encoder mounted
on the spin motor.
It allows you to change the unit of
measurement of the rims width from
mm to inches and vice versa.
It allows you to set the size values of
adhesive weights (see Par. 15.1.2).
Enable/disable the RUN-OUT func-
tions.
Enable/disable the functions of ma-
chine printing.
It allows you to change the unit of meas-
urement of the rim diameter from mm
to inches and vice versa.
Enable/disable the weights positioning
laser function.
Enable/disable the repositioning of the
wheel at the end of the spin.
Enable/disable user function.
It allows the setting of the retrieval
of the measures by eye: readout of
measures printed on the rim and
the graduated scale of the distance-
diameter caliper.
NOTE: it is activated only if distance-
diameter caliper is disabled.
Enable/disable the use of the manual
caliper to measure rim width.
NOTE: it is activated only if distance-
diameter caliper is disabled.
Enable/disable the function of clip
weights positioning laser wheel inner/
outer side “at 12 hours”.
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
RAVAGLIOLI S.p.A.
1297-M058-00
