INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 59 of 91
14.7.5 ALU-S
ALU-S program permits balancing wheels by two fit-
ting adhesive weights on the outer and inner sides of
the rim. Enter the measurements (see Par. 14.2.1 or
14.6.1) and proceed as described in Par. 14.5.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.6 ALU-S1
ALU-S1 function permits balancing wheels with light
alloy rims by fitting adhesive weights on the outer
side and weight with clip on inner side of wheel (at
“12 o'clock”).
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as described in Par. 14.5 (the inner weight
is with clip).
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.7 ALU-S2
ALU-S2 function permits balancing wheels with light
alloy rims by fitting two adhesive weights: one on the
outer and one on inner sides of the rim (the inner
weight is at “12 o’ clock”).
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as described in Par. 14.5.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.8 ALU-1
ALU-1 function permits balancing wheels with light
alloy rims by fitting adhesive weights on the outer and
inner sides of the rim at “12 o'clock”.
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as described in Par. 14.5.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
1297-M058-00
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
RAVAGLIOLI S.p.A.
