Rauch TWS 85.1, Instruction Manual

Page: 70 / 104

Instructions for load transfer 7
64
7.6 Discharging residual material
Discharge the machine daily after use. This helps to prevent corrosion and clog-
ging and to maintain the properties of the fertiliser. You may reuse the fertiliser
afterwards.
7.6.1 Safety notes
Furthermore, the following requirements must be met:

The machine is parked on even, solid ground and is secured against tilting
and rolling away.

The machine is attached to the tractor during discharge of residual quantities.

Nobody is present in the hazard zone.

The TWS slide closes.

The auger conveyor continues to operate for
the preset time to prevent clogging.

The auger conveyor stops.
Function/control Operating screen display
n
DANGER
Danger from running motor
Working on the load transfer vehicle while the engine is running
may result in serious injuries caused by mechanical components
and escaping fertiliser.

Never discharge residual quantities while the motor/univer-
sal drive shaft is running.
 Turn the tractor motor off and remove the ignition key.