Instructions for load transfer
7
68
7.
Remove the control lever [4] from the bracket at the frame.
The control lever is located at the front of the frame below the platform.
Figure 7.9:
Fold out the support stand
8.
Hold the support stand at the handle [3].
9.
Unlock the support stand by pressing together the locking pins [2] and fold it
down until the locking pins have locked in the lower position.
10.
Insert the control lever [4] into the holding fixture of the pump.
11.
Securely close the upper valve [1].
12.
Extend the support stand by pumping movements until the machine has re-
leased the coupling point of the tractor.
13.
Suspend the control lever [4] in the bracket provided below the platform.
14.
When disconnecting the machine
always disconnect the red coupling but-
ton
(supply) of the compressed-air braking system first.
15.
Before disconnecting the hydraulic connections, depressurise the hydraulic
system of the tractor (
floating position
).
16.
Disconnect the hydraulic, electrical and pneumatic connections from the tractor.
17.
Protect all connectors with dust caps.
18.
Disconnect the universal drive shaft from the tractor.
19.
Disconnect the machine from the tractor.
1
2
3
4
Summary of Contents for TWS 85.1
