Rauch TWS 85.1, Instruction Manual

Page: 65 / 104

Instructions for load transfer
59
7
7 Instructions for load transfer
7.1 General information

Reduce your speed on uneven ground.

Carefully pass the headlands.

Avoid sudden turns when driving uphill or downhill or across a slope.
-
By repositioning the gravity centre, there is a risk of toppling over.

Special care is to be particularly applied when driving on uneven, soft ground
(e.g. when entering fields, kerbs).
7.2 Procedure for load transfer and spreading operation with TWS
The intended use of the machine includes compliance with the operating, main-
tenance, and service conditions in accordance with the manufacturer specifica-
tions. The
load transfer and spreading operation therefore the always includes
preparation and cleaning/maintenance work.

Carry out the load transfer and spreading operations in accordance with the
procedure described below.
NOTICE
The service life of the machine mainly depends on your manner of driving.
Preparation

Install the load transfer vehicle at the tractor Page 38

Install the fertiliser spreader at the load transfer
vehicle Page 38

Close the slide

Close the emptying flap Page 53

Fill the load transfer vehicle and the spreader

Set the speed of the auger conveyor according
to the spreading quantity
See the operator's manual of
the QUANTRON-A control
unit

Make the settings at the fertiliser spreader
(working width, application rate, etc) See the operator's manual of
the fertiliser spreader
Load transfer/spreading operation

Travel to the spreading location

Switch on the PTO shaft and the hydraulic sys-
tem

Fill the fertiliser spreader