Commissioning
51
6
9.
Drive the forklift away.
Figure 6.11:
Drive the forklift away
12.
Mount the universal drive shaft to the machine (TWS-M 85.1 only)
13.
Connect the hydraulic and electric slide actuators and the lightning (see
tablish the connections“ on page 52
).
14.
Install the sensors in the spreader hopper. You
the level sensor to the fertiliser spreader“ on page 53
10.
Secure the fertiliser spread-
er at the load transfer vehi-
cle using the upper link strut
[1].
11.
Secure the upper link strut [1]
with the linkage pin [2].
Figure 6.12:
Secure the fertiliser spreader
at the top
NOTICE
Observe the installation and shortening instructions provided in the
operator’s
manual of the drive shaft manufacturer
when checking and adjusting the
drive shaft. The operator’s manual is attached to the drive shaft on delivery.
Summary of Contents for TWS 85.1
