Kangaroo Z Series User Manual Download

Page: 1 / 6

2021 MODEL

Quick Start Guide

Step 1: Attach Rear Wheels

•

Remove protective covers from main axle.

•

On outside of rear wheels, locate and push wheel release button.

•

Place wheel on axle, aligning drive pins on axle with four holes in
wheel panel.

Handle

Assembly

CaddieCommand

Remote Guidance

Upper Bag

Support

Push-Button Release

Wheels

Chassis

Steering

Structure

Your Kangaroo Z-series will arrive in five separate pieces. They are the

handle, chassis, rear push-button release wheels and steering structure.

Summary of Contents for Z Series

Page 1: ...tton Place wheel on axle aligning drive pins on axle with four holes in wheel panel H a n d l e A s s e m b l y CaddieCommand Remote Guidance Upper Bag Support Push Button Release Wheels Chassis Steering Structure Your Kangaroo Z series will arrive in five separate pieces They are the handle chassis rear push button release wheels and steering structure ...

Page 3: ...ttach wire plug to receptacle on backside of Z box Remove three plastic tie wrap bands from handle Insert handle assembly into chassis Attach wire from handle to back of Z box Be sure to unplug wire from Z box before removing handle assembly to avoid damage Be sure to twist collar when attaching and detaching handle wire ...

Page 4: ...gned T bar Set function switch to OFF Set speed control all the way down set function switch to MANUAL Slowly adjust thumb knob up to increase speed 3 way toggle Function Switch Speed Control thumb knob SET is recommended speed in remote mode Connect T bar to battery Make sure T bar is solidly connected matching positive to positive and negative to negative ...