Remote Control
Toggle function switch to REMOTE. Adjust speed control to desired
setting. SET a normal walking pace to start with.
•
GO
: Caddie will travel at speed selected on speed control.
•
FAST
: Light blinks green to confirm command. After a 2 second pause
caddie travels at maximum
speed. Press GO to return to
your pace selected on speed
control knob.
•
LEFT
: Front wheel will turn left.
Release button to automatically
re-center.
•
RIGHT
: Front wheel will turn
right. Release button to re-
center.
•
STOP
: Caddie will stop. Light
blinks red to confirm command.
For safety reasons, caddie will
automatically shut off if no
transmitter command is sent for 21 seconds.
Designed to avoid inadvertent commands, all remote commands
require a FIRM PUSH on keypad buttons.
Monitor STOP light especially; be
certain you can see caddie wheels clearly to verify what your caddie’s doing.
Don’t let it go “out of range” which can fluctuate with other radio signal
“noise activities” from place to place.
Transmitter comes equipped with 2 AA batteries that need replaced
periodically. Amber light on the keypad will signal need for replacement.
Fully Charge Battery
Attach charger to port on
left side of battery, then
plug charger in. When
green light comes on,
battery is fully charged.
Disconnect charger when
charge is complete. After
any round, even 9 holes,
fully recharge battery
to
extend life of your battery.
