Operation Quantron E
51
4
a) Select Auto km/h + Auto kg:
1.
Switch on the control unit Quantron E.
2.
Switch from the
Hopper configuration
menu to the
AUTO/MAN operation
menu.
3.
Highlight the
AUTO km/h + Auto kg
selection field.
4.
Press the
Enter key
.
The
Weigh Quantity
window appears.
5. Case a: Refill
The flow factor setting is retained.
The remaining fertiliser volume is increased by the refilling volume.
Case b: New fertiliser
The flow factor is reset to 1. If necessary, you can enter the required flow
factor value later on. See
4.4.3: Flow factor, page 36
.
6.
Highlight the required type of filling and press the
Enter key
to return to the
operating screen
.
b) Procedure when spreading with Auto km/h + Auto kg:
1.
Each time you switch on the Quantron E, use the
kg
button to switch to the
Weigh Quantity
menu and weigh the volume of fertiliser using
Refill
or
New
Fertiliser
.
See
4.2.3: Weigh quantity, page 27
2.
Press the
Enter key
.
3.
Carry out the fertiliser settings:
Application rate (kg/ha)
Working width (m)
4.
Pour the fertiliser in.
The
Weigh Quantity
window appears in the display.
n
CAUTION
Incorrect metering by pressing the ESC key
You must not press the ESC key. Doing so will result in serious
errors in the application rate/metering.
To confirm the weighing function, always press the
Enter
key
.
NOTICE
If the volume of fertiliser added to an empty hopper is less than 200 kg, switch
to the
AUTO km/h + Stat. kg
or
Auto km/h
mode.
Summary of Contents for quantron e
Page 8: ...User instructions 1 6...
