Rauch quantron e, Operator'S Manual

Page: 26 / 85

Operation Quantron E 4
24
4.2.1 Trip counter
You can find values for the completed spreading work (time, area, distance) with
this menu.
Figure 4.3: Trip counter menu
[1] Display of spread amount since the last reset
[2] Display of spread area since the last reset
[3] Display of spread distance since the last reset
[4] Clearing trip counter: all values to 0
Display and clear trip counter:
1.
Switch from the Weighing-Tripcounter menu to the Trip counter menu.

The values determined for the spread volume, the spread area and the
spread distance
since the last deletion appear in the display.
2. To clear the trip counter: The Del. trip counter field is highlighted in the dis-
play. Confirm with the Enter button .
 All values of the trip counter are reset to 0.
3. Press the kg key once.

This returns you to the operating screen.
Checking the trip counter during spreading:
You can switch to the Trip counter menu and read the current values during
spreading, i.e. with open slides.
NOTICE
If you should wish to constantly observe the values during the spreading proce-
dure you can also assign the freely selectable display fields on the operating
screen with
kg Trip , ha Trip or m Trip , see section 4.8.2: Display config.,
page 68 .