Operation Quantron E
4
42
Recalculate flow factor
1.
Weigh the spread fertiliser amount.
2.
Input the weight of discharged fertiliser in the input field of the
Input collected
weight
menu.
See also
4.9.2: Input of values using the cursor keys, page 76
.
3.
Confirm the input by pressing the
Enter key
.
The new value is saved in the operator panel.
The display shows the
Flow Factor Calculation
menu.
Figure 4.18:
Flow factor calculation menu
[1] Display of previously saved flow factor
[2] Display of new calculated flow factor
4.
Specify the flow factor.
To accept the
newly calculated
flow factor press the
Enter key
.
To confirm the
previously saved
flow factor press the
ESC key
.
The flow factor is saved.
The Fertiliser Settings menu is displayed.
5.
Press the
ESC key
to return to the
previous menu
or
Press the
Menu key
to return to the
Operating Screen
.
n
CAUTION
Danger of injury caused by automatic adjustment of
the drop point
On the
AXIS 50.1 W
the alarm
move to drop point
intervenes.
After actuating the
Start/Stop
button, the drop point is automati-
cally approached using the electrical setting cylinder to the pre-set
value. This can cause injuries and material damage.
Before actuating the
Start/Stop
button, ensure that no one
is in the danger area of the machine.
Summary of Contents for quantron e
Page 8: ...User instructions 1 6...
