Rauch quantron e, Operator'S Manual

Page: 13 / 85

Layout and function
11
2
Figure 2.3: Display on the control unit (using the operating screen as an example)
The icons and displays in the example have the following meaning:
No. Icon / Display Meaning (in the example)
1 Operating mode Shows the current operating mode.

Auto km/h uses the radar signal or wheel signal
for determining the speed.
2 Telimat icon This symbol appears if the Telimat Sensors are fit-
ted and the Telimat function is activated (factory
setting) or the T button has been activated.
3 Metering slide sca-
le opening right Current opening position of the right hand metering
slide.
4 Weight change
right Weight change ( +/- ) in percent.

Display of quantity changes.

Range of /- 1..99 % possible.
5 Application rate Preset application rate.
6 Display fields Configurable display fields (here: ground speed, flow
factor).

Possible configuration: see section 4.8.2: Display
config., page 68 .
7 Icon fields Icons assigned to fields depending on the menu .

Selection of the function by means of the
Function buttons located underneath.
8 Drop point Only AXIS 50.1 W: Display of the drop point position
9 Partial width right Display of status of partial width right.

No icon: partial width right not selected.

Empty icon (contour): Partial width right selec-
ted but not active.

Icon with black background: Partial width in
spreader operation .
5
9