Rauch MDS 8.2, Instruction Manual

Page: 83 / 146

Machine settings
77
8
Examples of spreader setting corrections:
Test re-
sult Fertiliser distribution Action, test
Case A Even distribution (admis-
sible deviation ±1 scale
line) Adjustments are correct.
Case B Fertiliser quantity de-
creases from right to left
(or vice versa). Are the same drop points set on the right
and left side?
Is the metering slide setting on the left
and right side the same?
Tramline distances the same?
Tramlines parallel?
Was there a strong side wind during the
test?
Case C Too little fertiliser in the
tractor track. Reduce the fertiliser quantity in the over-
lap zone:
Push back the spreading vane men-
tioned second in the fertiliser chart (for
smaller numbers).
e.g. C3-B2 to setting C3-B1.
If the angle correction of the spreading
vane mentioned second is not sufficient,
shorten the length of the spreading vane.
e.g. C3-B1 to setting C3-A1.
Case D Too little fertiliser in the
overlap zones. Reduce the fertiliser quantity in the trac-
tor track:
Push forward the spreading vane men-
tioned second in the fertiliser chart (for
larger numbers).
e.g. E4-C1 to setting E4-C2.
If the angle correction of the spreading
vane mentioned second is not sufficient,
increase the length of the spreading
vane.
e.g. E4-C2 to setting E4-D2.