Rauch MDS 8.2, Instruction Manual

Page: 125 / 146

Maintenance and service
119
12
12. Remove the bolt from the metering opening.
13. Loosen the screws [1] of the application rate scale.
9. Pull out the hydraulic cylinder
Figure 12.8: Pull out the hydraulic cylinder
A second person is required
for this stage.
10. Person 1:
Insert the lower
link pin into the metering
opening (see stage
[9] ).
Person 2: Move the position
pointer to smaller values un-
til the metering slide is at the
bolt [1].
Figure 12.9: Move the position pointer
11. Move the stopper to the po-
sition pointer and clamp the
stopper tightly.
Figure 12.10: Move the stopper
1