Safety
3
18
3.11.1 Warning stickers
Read the operator’s manual and warning messages.
Read and observe the operator's manual and warning mes-
sages before commissioning the machine.
The operator’s manual explains in detail how to operate the
spreader and contains valuable information on operation,
care and maintenance.
Danger due to ejection of material
Danger of injury to the whole body caused by ejected spread-
ing material
Before commissioning, instruct all people to leave the hazard
zone (spreading range) of the machine.
Danger due to moving parts
Risk of body parts being cut off
It is prohibited to reach into the danger area of the rotating
spreading discs or the agitator.
Switch off the engine and remove the key before carrying out
any maintenance, repair and adjustment work.
Remove the ignition key.
Before carrying out any repair and maintenance work, shut
off the engine and remove the ignition key.
Crushing hazard between the tractor and the machine
There is a crushing hazard that may result in fatal injury for
persons standing between the tractor and the machine when
the tractor approaches or the hydraulic system is actuated.
The tractor may brake too late or not at all because of inat-
tention or faulty operation.
Ensure that nobody is present in the hazard zone between
the tractor and the machine.
Summary of Contents for MDS 8.2
