Rauch MDS 8.2, Instruction Manual

Page: 84 / 146

Machine settings 8
78
If, in spite of adjusting the spreading vane mentioned second, the result is
not achieved, the spreading vane mentioned first can also be adjusted.
Spreading width too wide
1. Adjust the position of the spreading vane mentioned first to the next smallest
working width according to the fertiliser chart, e.g. E4-C1 (18 m) to setting D4-
C1 (15 m).
Spreading width too narrow
2. Adjust the position of the spreading vane mentioned first to the next largest
working width according to the fertiliser chart, e.g. D4-C1 (15 m) to setting E4-
C1 (18 m).
8.6 Spreading to one side
Version Settings for spreading to one side Result
K

To spread on the left or right, re-
lease the corresponding control
valve. The springs pull the respective me-
tering slide against the stopper.
R
or
K with optional equip-
ment two-way unit

To spread on the left or right,
close or open the corresponding
ball valve of the two-way unit.

Release the control valve.
The springs pull the respective me-
tering slide against the stopper.
D

To spread on the left or right, ac-
tivate the corresponding control
valve. The hydraulic cylinder pulls the re-
spective metering slide against the
stopper.
C

To spread on the left or right, ac-
tivate the corresponding toggle
switch of the E-CLICK. The actuator pulls the respective
metering slide against the stopper.
Q

To spread on the left or right, ac-
tivate the corresponding
start/stop button on the control
unit. The actuator opens the respective
metering slide corresponding to the
electronic controls.