Commissioning
43
7
7.4
Installing the machine on the tractor
7.4.1
Requirements
Check the following specific requirements:
Are both the tractor and the machine in a reliable condition?
Does the tractor comply with the mechanical, hydraulic, and electrical require-
ments?
-
See
“Tractor requirements“ on page 39
.
Do the attachment categories of the tractor and the machine match (if neces-
sary, consult your dealer)?
Is the machine securely positioned on level and solid ground?
Do the axle loads conform to the stipulated calculations?
-
See
5: Axle load calculation, page 33
n
DANGER
Danger to life due to unsuitable tractor
Using an unsuitable tractor for the machine may result in severe
accidents during operation or road travel.
Only use tractors that comply with the technical require-
ments of the machine.
Use the vehicle's documentation to check if your tractor is
suitable for the machine.
Summary of Contents for MDS 8.2
