Rauch MDS 8.2, Instruction Manual

Page: 71 / 146

Machine settings
65
8
Example of full border spreading during normal fertilising:
Figure 8.4: Full border spreading during normal fertilising
Full border spreading in normal fertilisation mode refers to a spreading process
in which a bit more fertiliser lands beyond the border of the field. Therefore, there
is a slight underfertilisation at the field boundary.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters :
Type of fertiliser: ENTEC 26 COMPO BASF
Working width: 12 m
Spreading disc type: M1
Forward speed: 10 km/h
Application rate: 300 kg/ha
NOTICE
On the full border spreading side , both spreading vanes must be set to the
value stated in the fertiliser chart.
On the other spreading disc, the spreading vanes remain in their normal
fertilisation position.
Mounting height: 50/50 (A = 50 cm, B = 50 cm)
Metering slide adjustment: 160
PTO speed: 540 rpm
spreading vane adjustment
Full border spreading side:
Other spreading disc
(normal fertilisation position):
A3-A3
C3-B2