5 | Intelligent cooking - iCookingSuite
38 / 112
Operating instructions
4. Close the cooking cabinet door.
5. Press the button
>
A window appears in which you can set the core temperature.
6. Select the desired core temperature.
>>
Your setting will be applied automatically after just a few seconds.
Repeat this step until all the food has reached the desired core temperature.
New batch
With this option, you can load the unit with a new batch and continue the cooking process with the defined
cooking parameters.
First you will be asked to unload the unit and then load it again. When you have loaded the unit with a new batch
and you close the cooking chamber door, the cooking path continues.
Time continued
With this option, the cooking process will continue for a certain time. If you select the option at the end of the
cooking path, a window appears where you can set how long you would like the cooking path to be continued for.
1. Select the desired duration.
>>
Your setting will be applied automatically after just a few seconds.
If you switch from the cockpit back to the cooking parameters, the overview is greyed out. You cannot change the
cooking parameters. Once the time you have set has expired, you can either unload the unit or continue the
cooking path with an option.
Crisp
With this option, food is crisped to produce crispy crusts and roast aromas.
In mixed loads, take the food you do not want to crisp out of the unit. Then start the
Crisping
option.
If you have cooked food in containers and some liquid fat has accumulated during cooking, replace the container
before starting the
Crisping
option. This prevents the build up of unnecessary smoke during crisping.
If the food does not have the desired crust or colour after crisping, select the
Time continued
option. You can then
set how much longer the food should crisp for.
Rare food is not suitable for crisping. The high temperature would produce grey edges.
1. To adjust the parameters of the
Overcrust
option, press the button:
2. Adjust the parameters as required.
>>
When the end of the cooking path has been reached, the
Overcrust
cooking step is automatically started.
