Raritan Paragon II, Deployment Manual

Page: 26 / 64

18 P
ARAGON
II / C
OMMAND
C
ENTER
I
NTEGRATION
S
OLUTIONS
D
EPLOYMENT
G
UIDE
IP-Reach Initial Configuration
The IP-Reach Setup Wizard will assist in initial IP-Reach setup. The Wizard appears only when
accessing the Administrative Menus on a non-configured IP-Reach unit.
1. When the IP-Reach unit has booted up, the IP-Reach Setup Wizard screen appears.
Figure 12 IP-Reach Setup Wizard
2. Press the letter B on the Local Admin Console keyboard to begin the IP-Reach Setup Wizard.
Figure 13 IP-Reach Network Configuration
3. Use the TAB ,
Ç
or
È
keys on your keyboard to move through fields on the Network
Configuration screen and the SPACE BAR , or the
Å
or
Æ
keys to toggle between available
entries. Press the ENTER , TAB , or
È
keys when your entry on each line is complete.
A. Name : Designate a unique name for this IP-Reach unit, for example, “Server Room”.
The default name is IP-Reach.
B. Enable Ethernet Interface : Designates whether or not the Ethernet adapter is active or
inactive (default: YES). “YES” is required for Paragon II and CommandCenter
Integration configurations.
i. Line Speed & Duplex : Auto detect 10 Mbps/Full Duplex, 10 Mbps/Half Duplex,
100 Mbps/Full Duplex, or 100 Mbps/Half Duplex
ii. Obtain IP address automatically (DHCP) :
♦
YES: Enables dynamic IP addressing for IP-Reach. Each time IP-Reach boots, it requests
an IP address from the local DHCP server. Note that this setting can make remote access