Raritan Paragon II, Deployment Manual

Page: 44 / 64

36 P
ARAGON
II / C
OMMAND
C
ENTER
I
NTEGRATION
S
OLUTIONS
D
EPLOYMENT
G
UIDE
27. When all devices and targets are added, close the P2SC Admin and return to CommandCenter
Secure Gateway.
28. In the CommandCenter Secure Gateway Devices tree, select the Paragon II System Controller
you just added. Right-click on the icon and select
Configure Ports from the shortcut menu.
All available ports in the Paragon system you just added will be listed.
29. Select the ports you want to add to the device tree by clicking on the corresponding
checkboxes (or select all of them at once by clicking on the
topmost checkbox ), then click
OK. The selected ports now appear in the Nodes tab as well as the Devices tab as branches of
the Paragon II System Controller and act as any other CommandCenter Secure Gateway
target (i.e. associations and user access permissions are handled by CC-SG. See the
CommandCenter Secure Gateway Administrators/User Guide for detailed instructions on
managing targets).
Note: Locating the specific port, or ports, you wish to configure is easier if you look under the
“Port Name” column for the name you previously assigned in the Paragon II System Controller
Admin.