Raritan IP-Reach IPR-M1 User Manual Download | Manualshive

Page: 82 / 84

background image

74

IP-R

EACH

U

SER

M

ANUAL

Event Log File and On-Screen Error Codes

IP-Reach will display or log an error code in the

IP-Reach Event Log Screen

in the event of a problem

occurring. Error codes are eight-digit hexadecimal numbers, containing two parts: the first four denote error
type; and the second four digits denote a location code.

These last four digits of the IP-Reach error code are the most useful in determining what has caused a
system failure. Below is a list of location codes (the last four digits of an error code), and their meanings.

E

RROR

C

ODE

(

LAST

4

DIGITS

)

M

EANING

R

ECOMMENDATION

0001 – 0003

Memory allocation error

Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.

0004

Could not read the
configuration file on startup.
The file may be corrupt, the
file system may be
damaged, or the config file
might be from an older
version of IP-Reach.

Reenter the configuration information and reboot. If
the problem continues, restore the software and file
system from the Recovery CD-ROM.

0005

The config file was missing.
This may be the first time
you have started IP-Reach
or the file system has
become corrupt.

Reenter the configuration information and reboot. If
the problem continues, restore the software and file
system from the Recovery CD-ROM.

0006

The config file could not be
saved. The file system may
be corrupt or the hard drive
may not be responding.

Retry, but if the problem persists, restore the
software and file system from the Recovery CD-
ROM.

0007 – 0008

Memory allocation error.

Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.

Delete

Memory allocation error.

Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
recovery CD-ROM.

0009

Could not find the frame
grabber card.

Power off the system and make sure the frame
grabber card is inserted firmly. If the problem
persists, there may be a problem with your IP-Reach
hardware.

000A

Frame grabber card is not
responding correctly.

Power off the system and make sure the frame
grabber card is inserted firmly. If the problem
persists, there may be a problem with your IP-Reach
hardware.

000B

Memory allocation error.

Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.

000C – 000F

Memory allocation error.

Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.

«
...
80
81
82
83
84
»

Summary of Contents for IP-Reach IPR-M1





















































































Reviews:

No comments

Related manuals for IP-Reach IPR-M1

Brand: GE Pages: 20

Brand: Sealey Pages: 2

Brand: Sealey Pages: 2

Brand: Fisher & Paykel Pages: 2

Brand: I-Tech Pages: 1

CAPE COD STORAGE DRAWERS

Brand: Night & Day Furniture Pages: 2

Brand: Nordmende Pages: 24

Brand: Nordmende Pages: 24

Brand: Euro Style Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands