Raritan IP-Reach IPR-M1 User Manual Download | Manualshive

Page: 62 / 84

background image

54

IP-R

EACH

U

SER

M

ANUAL

Remote Authentication Implementation

Introduction

Note to CommandCenter Users

If you plan to configure IP-Reach to be integrated with and controlled by Raritan’s CommandCenter
management appliance, this section of the User Manual does not apply to you. When an IP-Reach unit is
controlled by CommandCenter, CommandCenter determines the allowed users and groups. Please refer to
your CommandCenter User Guide.

Note to Raritan Customers Upgrading from Previous Firmware Versions

If you have previously implemented RADIUS authentication on Raritan products such as Dominion KSX
and IP-Reach running legacy firmware versions earlier than v3.2, read this entire section carefully.
Beginning with firmware version v3.2 and above, the implementation of external authentication has
changed significantly to provide more flexible and powerful configurations.

Supported Protocols

To simplify management of usernames and passwords, IP-Reach is able to forward authentication requests
to an external authentication server. IP-Reach supports two external authentication protocols: LDAP and
RADIUS.

Note on Microsoft Active Directory

Microsoft Active Directory uses the LDAP protocol natively, and can function as an LDAP server and
authentication source for IP-Reach. If it has the IAS (Internet Authorization Server) component, a
Microsoft Active Directory server can also serve as a RADIUS authentication source.

Remote Authentication Implementation

Priority

When a user tries to authenticate to an IP-Reach unit that is configured for external authentication, IP-
Reach first checks its own internal user database for that username. If the username is not found in the IP-
Reach internal database, the request is forwarded to the external authentication server.

•

If Username is not found in IP-Reach

internal database:

Request is forwarded to external

authentication server to determine whether the login is allowed or denied.

•

If Username is found in IP-Reach

internal database and Password is correct:

Login is allowed.

•

If Username is not found in IP-Reach

internal database and Password is incorrect:

Login is

denied; the request does NOT get forwarded to the external authentication server.

«
...
60
61
62
63
64
...
»

Summary of Contents for IP-Reach IPR-M1





















































































Reviews:

No comments

Related manuals for IP-Reach IPR-M1

Brand: Beko Pages: 88

Brand: Cyber View Pages: 16

Brand: Little Shed Creations Pages: 2

Brand: Samsung Pages: 48

Versa Drawer F18VD50

Brand: Delfield Pages: 2

Brand: John Lewis Pages: 4

Brand: Haushalt International Pages: 6

IPPC-4008 Series

Brand: Advantech Pages: 16

Cyber View SP-120

Brand: Austin Hughes Pages: 12

Brand: Austin Hughes Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands