Raritan Dominion KX2-832, User Manual

Page: 30 / 321

Chapter 2: Installation and Configuration
21
Tip: If you do not want to be prompted upon log out, follow these
procedures instead.
To make your settings permanent in Linux (no prompt):
1. Choose Desktop > Control Center > System > Sessions.
2. Click the Session Options tab.
3. Deselect the "Prompt on the log off" checkbox.
4. Select the "Automatically save changes to the session" checkbox
and click OK. This option automatically saves your current session
when you log out.
Sun® Solaris
™
Settings
To configure KVM target servers running Sun Solaris:
1. Set the mouse acceleration value to exactly 1 and the threshold to
exactly 1. This can be performed from:
ƒ
The graphical user interface.
ƒ
The command line xset mouse a t where a is the acceleration
and t is the threshold.
2. All KVM target servers must be configured to one of the display
resolutions supported by the Dominion KX II. The most popular
supported resolutions for Sun machines are:
Display resolution Vertical refresh rate Aspect ratio
1600 x 1200 60 Hz 4:3
1280 x 1024 60,75,85 Hz 5:4
1152 x 864 75 Hz 4:3
1024 x 768 60,70,75,85 Hz 4:3
800 x 600 56,60,72,75,85 Hz 4:3
720 x 400 85 Hz 9:5
640 x 480 60,72,75,85 Hz 4:3