Ransomes FAIRWAY 250, Operator Instructions Manual

Page: 39 / 80

37
GB GB
GB GB
GB
CUTTING PERFORMANCE (AREA) CUTTING PERFORMANCE (AREA)
CUTTING PERFORMANCE (AREA) CUTTING PERFORMANCE (AREA) CUTTING PERFORMANCE (AREA)
1.7 hectares/hr. at 9 km/hr. (4.2 acres/hr. at 5.6 mph)
Allowance is included for normal overlaps and turning at the end of each cut.
CUTTING RATIO (METRIC) CUTTING RATIO (METRIC) CUTTING RATIO (METRIC) CUTTING RATIO (METRIC) CUTTING RATIO (METRIC)
Forward cuts per metre
speeds
km/hr
7-Knife 11-Knife
8 84 131
11 61 94
CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP)
Forward inch clip
speeds
m.p.h.
7-Knife 11-Knife
5 0.47 0.30
7 0.65 0.42
CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL)
Forward cuts per yard
speeds
m.p.h.
7-Knife 11-Knife
5 77 120
7 55 85
CUTTING PERFORMANCE CUTTING PERFORMANCE
CUTTING PERFORMANCE CUTTING PERFORMANCE CUTTING PERFORMANCE
The cuts per metre (cuts per yard) are dependant upon the forward speed of the machine. The figures quoted
in the cutting ratio charts are given with the variable cylinder speed set at 1300rpm.