12 of 43 20111206-Ver7
When an appliance is supplied on casters and is connected to the supply piping by means
of a connector for movable appliances, the operator shall be aware there is a restraint on
the appliance and, if disconnection of the restraint is necessary, to reconnect this restraint
after the appliance has been returned to its originally installed position.
Cleaning The Infrared side burner
1. Turn all Burner Valves to the full OFF position.
2. Turn the LP Gas tank valve to the full OFF position.
3. Detach the LP Gas regulator assembly from your gas
cylinder.
4. Remove the Cooking Grates from the side burner.
5.
Remove the mounting screws at the back of side burner.
6. Slide the infrared burner out of the enclosure.
7. Check and clean burner/ venturi tubes for insects and
insect nests. A clogged tube can lead to a fire beneath the
grill.
8
. Bend a stiff wire or wire coat hanger into a small hook as shown and run the hook
through the Burner Tube and inside the Burner several times to remove debris.
WARNING
For safe operation ensure the Gas Valve Assembly Orifice is inside
the Burner Tube before using your grill. See figure. If the Orifice is
not inside the Burner Tube, lighting the Burner may cause
explosion and/ or fire resulting in serious bodily injury and/or
property damage.
CAUTION
Keep outdoor cooking gas appliance area clear and free from combustible materials,
gasoline and other flammable vapors and liquids.
Do not obstruct the flow of combustible and ventilation air.
Keep the ventilation openings of the cylinder enclosure free and clear of debris.
Check and clean burner/venturi tubes for insects and insect nests. A clogged tube
can lead to a fire beneath the grill.
Clean the Grill
Clean grill often, preferably after each cookout. If a bristle brush is used to clean any of the
grill cooking surfaces, ensure no loose bristles remain on cooking surfaces prior to grilling.
It is not recommended to clean cooking surfaces while grill is hot.
