8 of 43 20111206-Ver7
LIGHTING INSTRUCTIONS
BEFORE LIGHTING
WARNING
Inspect the gas supply hose prior to turning the gas “ON”.
If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use.
Do not use the grill if the odor of gas is present.
Only the pressure regulator and hose assembly supplied with the unit should be
used.
Perform the “
LEAK TEST
” according to instruction before operating the grill.
ALWAYS
keep your face and body as far away from the burner as possible while
lighting.
LIGHTING THE MAIN BURNER OF GRILL
1.Read all instructions before lighting.
2.Open lid during lighting.
3.Light the IGNITION BURNER first. Push and turn main burner knob slowly to HI. Burner
should light immediately.
4.Once the IGNITION BURNER is lit, you may light the rest of burners.
5.If ignition does not occur in 5 seconds, turn the knob(s) off, wait 5 minutes, then repeat
the lighting procedure or light by match.
6. To turn burners off, turn the control knobs clockwise until they lock in the OFF
position.Turn gas supply to OFF.
Light this burner first! Turn
counterclockwise to open
