5 of 43 20111206-Ver7
DANGER
DO NOT connect this grill to an existing #510 POL cylinder valve with Left hand
threads. The Type 1 valve can be indentified with the large external threads on the
valve outlet.
DO NOT connect to a propane cylinder exceeding this capacity.
DO NOT connect to a cylinder that uses any other type of valve connection device.
Never store a spare LP gas cylinder under or near your grill. This could cause
pressure to be expelled through the vapor relief valve resulting in fire, explosion, or
severe personal injury including death.
Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from
obstructions and debris.
DO NOT insert any foreign objects into the valve outlet. Damage to the back-check
could result. A damaged back-check can cause a leak, possibly resulting in
explosions, fire, severe bodily harm, or death.
Place dust cap on cylinder valve outlet whenever cylinder is not in use. Only install
the type of dust cap on the cylinder valve outlet that is provided with the cylinder
valve. Other types of caps or plugs may result in leakage of propane.
WARNING
FOR FILLING THE LP GAS CYLINDER
Allow only qualified LP gas dealers to properly fill or repair your LP cylinder.
DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can
create a dangerous condition. Over-filled tanks can build-up pressure and cause the
relief valve to expel propane gas vapors. The vapor is combustible and if it comes in
contact with a spark source or flame an explosion causing severe burns, bodily
harm, or death could occur.
Always use a safety cap when grill is not connected to cylinder.
If you exchange a cylinder with a qualified exchange program, be sure the cylinder
has a Type 1 valve and an over-filling prevention device (OPD).
INSTALLING GAS CYLINDER
1. Check that cylinder valve is closed by turning
knob clockwise.
2. Place cylinder into Gas Tank Block Bar in
bottom cabinet.
3. Position cylinder where the the valve opening
faces side burners and so that hose is not
kinked/damaged.
4. Attach or detach regulator to LP cylinder only
when cylinder is rested atop the gas tank block
bar.
Gas Tank Block Bar
WARNING: Keep the fuel supply hose
away from any heated surfaces.
