Ranger Products RX3040, Installation And Operation Manual

Page: 32 / 74

32
Machine Prep
Before loading a tire onto the RX3040, prepare the
machine.
1. Move the upper Bead Breaker Roller to its highest
position.
2. Move the Lower Bead Breaker Roller to it’s lowest
position.
3. Move the Drop Center Swing arm out of the way.
4. Pivot the Upper Bead Roller arm out of the way.
5. Retract the Tool Head Arm and raise it to it’s highest
position.
6. Press the Turntable Rotation Pedal and align the
Centering Pin towards the front (6 o’clock position) This
will ease the alignment of the Pin with a lug hole on the
Rim. (See Fig. 10.3)
CAUTION!
CHECK THAT NO TOOLS, OBJECTS OR PEOPLE
ARE IN THE WAY OF THE MOVING COMPONENTS
OF THE MACHINE
NOTE:
Be sure to remove the Small Cone from the
Turntable as it can drop below the Turntable and
cause some wheel mounting difficulty.
(See Fig. 10.2)
Fig. 10.2
Fig.10.3