Ranger Products RX3040, Installation And Operation Manual

Page: 17 / 74

17
Center Post
CENTER POST - HEIGHT ADJUSTMENT
1. The Center Post has two Height position. High and
Low.
2. To adjust the Center Post remove the Hair Pin and
Shaft pin and raise or lower the Center Post as required.
(See Fig. 9.4)
3. Align the holes and replace the Shaft pin and Hair
Pin.
CENTER POST - FORWARD AND BACKWARD
The Center post can be Adjusted front and backwards to
align the Wheel Rim with the Bead Breaker Rollers and
Hook and Tab Assist Arm.
1. The Control for the Center Post Forward and Back-
ward is located on the Control Pod. (See Fig. 9.5 - 9.6)
2. Refer to Wheel Demounting procedures for Complete
Operation Instructions and Adjustments during
Demounting and Mounting.
Fig. 9.6
Fig. 9.4
Fig. 9.5