Ranger Products RX3040, Installation And Operation Manual

Page: 21 / 74

21
Tool Head
There are two options for the Tool head. Steel and Plastic.
The Tool Head can be adjusted in 4 ways.
1. Up and Down
2. In and Out; Manually
3. Out : Target Lock™ (Auto Locating )
4. Hook or Tab Position
UP AND DOWN
1. Use the Joystick on the Control Pod to raise and
lower the Tool Head Assembly Up or Down.
(See Fig. 9.18 & 9.19)
IN AND OUT- MANUALLY
1. Using the Joystick on the Control Pod to Retract and
Extend the Tool Head Assembly In or Out. (See Fig. 9.20)
Fig. 9.18
Fig. 9.19
Fig. 9.20