44
4. Lower the Drop Center Tool to Push the Upper Bead
below the Rim’s Drop Center. (See Fig. 14.9)
5. Press the Turn table Rotation pedal to rotate the tire
and rim clockwise.
KEEP HANDS CLEAR!
(See Fig. 14.10)
6. Continue rotation till Upper Bead drops below Rim.
(See Fig. 14.11 &14.12)
1. Move the Upper Bead Breaker Roller to its highest
position.
2. Pivot the Upper Bead Roller arm out of the way.
3. Move the Drop Center Swing Arm Up and to the right,
out of the way.
WARNING!
KEEP HANDS CLEAR!
KEEP HANDS CLEAR OF ALL COMPONENTS OF
THE TIE CHANGER WHEN ROTATING TURNTABLE
DURING MOUNTING PROCEDURES. THERE ARE
MANY PINCH OR CRUSH HAZARDS IF HANDS ARE
KEPT IN CONTACT WITH THE MACHINE DURING
DEMOUNTING ROTATION.
NOTE:
TABLE TOP ROTATION CAN BE STOPPED AT
ANY TIME BY REMOVING YOUR FOOT FROM THE
ROTATION PEDAL. NORMAL TABLE TO ROTATION
FOR DEMOUNTING IS CLOCKWISE. DEPRESS
THE TABLE TOP ROTATION PEDAL TO ROTATE
CLOCK WISE. TO ROTATE COUNTER CLOCKWISE,
LIFT THE PEDAL UP WITH YOUR FOOT.
Fig. 14.11
Fig. 14.12
Fig. 14.9
Fig. 14.10
Summary of Contents for RX3040
