Ranger Products RX3040, Installation And Operation Manual

Page: 50 / 74

50
WARNING!
CHECK TIRE PRESSURE FREQUENTLY. NEVER
EXCEED 40 PSI WHILE SEATING BEADS. ONCE
SEATED, NEVER EXCEED TIRE MANUFACTURER’S
RECOMMENDED AIR PRESSURE. TIRES CAN
EXPLODE, ESPECIALLY IF THEY ARE INFLATED
BEYOND THEIR LIMITS. AT ALL PRESSURE
LEVELS, WHEN INFLATING THROUGH THE VALVE
STEM; KEEP HANDS, ARMS, AND ENTIRE BODY
AWAY FROM INFLATING TIRE.
AN EXPLODING TIRE, WHEEL OR BEAD SEATING
EQUIPMENT MAY PROPEL UPWARD AND
OUTWARD WITH SUFFICIENT FORCE TO CAUSE
SERIOUS INJURY OR DEATH TO OPERATOR OR
BYSTANDER.
MIS-MATCHED TIRES AND WHEELS
NEVER ATTEMPT TO MOUNT MIS-MATCHED
TIRES AND WHEELS. MIS-MATCHED TIRE AND
WHEEL COMBINATIONS CAN EXPLODE, CAUSING
PERSONAL INJURY OR DEATH TO OPERATOR
AND BYSTANDERS. FOR SAFETY, DO NOT
ATTEMPT TO MOUNT AND INFLATE MIS-MATCHED
TIRES AND WHEELS.
DANGER!
NEVER INCREASE AIR PRESSURE TO EXCEED
40 PSI WHEN ATTEMPTING TO SEAT BEAD.
IF OPERATOR IS UNABLE TO OBTAIN BEAD
SEAT, SOMETHING IS WRONG. DEFLATE
TIRE COMPLETELY, INSPECT TIRE AND
WHEEL; CORRECT ANY PROBLEMS FOUND,
RE-LUBRICATE BOTH BEADS AND REATTEMPT
BEAD SEAL AND SEAT PROCEDURES. FOLLOW
ALL SAFETY INSTRUCTIONS IN THIS MANUAL.