Ranger Products RX3040, Installation And Operation Manual

Page: 6 / 74

6
SECTION 3
IMPORTANT SAFETY INSTRUCTIONS!
Read these safety instructions entirely!
1. READ AND UNDERSTAND all safety warning
procedures before operating lift.
2. KEEP HANDS AND FEET CLEAR. Remove hands
and feet from any moving parts.
3. KEEP WORK AREA CLEAN . Cluttered work areas
invite injuries.
4. Consider work area environment. Do not expose
equipment to rain. DO NOT use in damp or wet
locations. Keep area well lighted.
5. ONLY TRAINED OPERATORS should operate
this equipment. All non-trained personnel should be
kept away from work area. Never let non-trained
personnel come in contact with, or operate machine.
6. USE MACHINE CORRECTLY . Use machine in the
proper manner. Never use adapters other than what is
approved by the manufacturer.
7. DO NOT override or disable safety valves and/or
devices.
11. ALWAYS INSURE that any safety components are
engaged before any attempt is made to work on or near
machine.
9. DRESS PROPERLY . Non-skid steel-toe footwear
is recommended when operating machine.
11. GUARD AGAINST ELECTRIC SHOCK! This
equipment must be grounded while in use to protect the
operator from electric shock. Never connect the green
power cord wire to a live terminal. This is for ground
only.
11.
DANGER!
The motor on this machine contains
high voltage. Disconnect power at the
receptacle before performing any electrical
repairs. Secure plug so that it cannot be
accidentally plugged in during service.
12. WARNING! RISK OF EXPLOSION . This
equipment has internal arcing or sparking
parts which should not be exposed to
flammable vapors. This machine should
not be located in a recessed area or below
floor level.
13.
MAINTAIN WITH CARE.
Keep unit clean for
better and safe performance. Follow manual for proper
lubrication and maintenance instructions. Keep control
pedals and/or buttons dry, clean and free from grease
and oil.
14. STAY ALERT . Watch what you are doing. Use
common sense. Be aware.
15. CHECK FOR DAMAGED PARTS . Check for
condition of all moving parts, breakage of parts or any
condition that may affect the machines operation. Do
not use if any component is broken or damaged.
16. NEVER remove safety related components or
device from the machine. Do not use if safety related
components are damaged or missing.
17. To reduce fire hazard, keep engine/motor
exterior free of oil, solvent, or
excessive grease.
111. Illegible and missing warning labels must be
replaced immediately. Do not use the tire changer
if one or more labels are missing. Do not add any
object that could prevent the operator from seeing
the labels.