R&S SMW-K106, User Manual, Page: 230 / 455

Remote-Control Commands Satellite Navigation
230 User Manual 1178.6379.02 ─ 01
<LatitudeDeg> integer
Defines the latitude degrees.
Range:
0 to 90
*RST: 0
<LatitudeMin> integer
Defines the latitude minutes.
Range:
0 to 59
*RST: 0
<LatitudeSec> float
Defines the latitude seconds.
Range:
0 to 59.999
Increment: 1E-4
*RST:
0
<LatitudeDir> NORTh | SOUTh
Defines the latitude direction.
*RST:
NORT
<Altitude> float
Defines the altitude in meters above sea level.
Range:
-10E3 to 50E6
Increment: 0.01
*RST:
0
Example: See Example "Static receiver" on page 225.
Manual operation: See "Location Coordinates, Position Format" on page 44
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ATTitude[:BEHaviour]
<AtitudeBehaviou>
Defines how the attitude information is defined.
Parameters:
<AtitudeBehaviou> CONStant | FILE | MOTion | SPINning
FILE
enabled if smoothing is not used.
Example: See Example "Moving receiver" on page 226.
Options: R&S SMW-K108
Manual operation: See "Attitude Behaviour, More" on page 44
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ATTitude:YAW <Yaw>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ATTitude:PITCh <Pitch>
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:ATTitude:ROLL <Roll>
Sets the attitude parameters relative to the local horizon.
Receiver Positioning Configuration Commands