![background image](http://html1.mh-extra.com/html/rands/rtc1k-com2/rtc1k-com2_user-manual_3178337331.webp)
Remote Commands Reference
R&S
®
RTC1000
331
User Manual 1335.7352.02 ─ 04
SYSTem:BEEPer:TRIG:STATe
<TriggerBeep>
Enables or disables the beep if a trigger occurs.
Parameters:
<TriggerBeep>
ON | OFF
SYSTem:BEEPer:CONTrol:STATe
<ControlBeep>
Enables or diables a sound for general control events, e.g. reaching the rotary encoder
end or changing the measuring mode in the "Automeasure" menu.
Parameters:
<ControlBeep>
ON | OFF
SYSTem:BEEPer:ERRor:STATe
<ErrorBeep>
Enables or disables the beep if an error occurs.
Parameters:
<ErrorBeep>
ON | OFF
SYSTem:EDUCation:PRESet
Deletes the password of the education mode.
Usage:
Event
13.19
Status Reporting
13.19.1
STATus:OPERation Register
The commands of the STATus:OPERation subsystem control the status reporting
structures of the STATus:OPERation register:
See also:
●
Chapter C.1, "Structure of a SCPI Status Register"
●
The following commands are available:
......................................................................................332
............................................................................................332
..................................................................................... 332
......................................................................................332
..........................................................................................332
Status Reporting