![background image](http://html1.mh-extra.com/html/rands/rtc1k-com2/rtc1k-com2_user-manual_3178337267.webp)
Remote Commands Reference
R&S
®
RTC1000
267
User Manual 1335.7352.02 ─ 04
13.16.2
Parallel / Parallel Clocked Bus
BUS<b>:PARallel:DATA<m>:SOURce
..............................................................................267
................................................................................................267
BUS<b>:CPARallel:DATA<m>:SOURce
........................................................................... 267
............................................................................... 268
................................................................................. 268
......................................................................................268
......................................................................................269
..............................................................................................269
BUS<b>:PARallel:DATA<m>:SOURce
<DataSource>
Defines the digital channel that is assigned to the selected bit. Use the command for
each bit of the bus.
Suffix:
<b>
.
1, 2
Selects the bus.
<m>
Selects the bit line
Parameters:
<DataSource>
D0 .... D7
*RST:
D0
Example:
BUS:PAR:WIDT 4
BUS:PAR:DATA0:SOUR D2
BUS:PAR:DATA1:SOUR D3
BUS:PAR:DATA2:SOUR D4
BUS:PAR:DATA3:SOUR D5
BUS<b>:PARallel:WIDTh
<BusWidth>
Sets the number of lines to be analyzed.
Suffix:
<b>
.
1, 2
Selects the bus.
Parameters:
<BusWidth>
Range:
1 to 6
Increment: 1
*RST:
6
Default unit: Bit
BUS<b>:CPARallel:DATA<m>:SOURce
<DataSource>
Defines the digital channel that is assigned to the selected bit.
Use the command for each bit of the bus.
Protocol Analysis