![background image](http://html1.mh-extra.com/html/rands/rtc1k-com2/rtc1k-com2_user-manual_3178337212.webp)
Remote Commands Reference
R&S
®
RTC1000
212
User Manual 1335.7352.02 ─ 04
DISPlay:INTensity:BACKlight
<Intensity>
Defines the intensity of the background lighting of the display. *RST does not change
the intensity.
Parameters:
<Intensity>
Value in percent
Range:
10 to 100
DISPlay:INTensity:GRID
<Intensity>
Defines the intensity of the grid on the screen. *RST does not change the intensity.
Parameters:
<Intensity>
Value in percent
Range:
0 to 100
DISPlay:PERSistence:STATe
<State>
Defines whether the waveform persists on the screen or whether the screen is
refreshed continuously.
Parameters:
<State>
ON | OFF
ON
The waveform persists for the time defined using
OFF
The waveform does not persist on the screen. Only the currently
measured values are displayed at any time.
*RST:
OFF
DISPlay:PERSistence:TIME
<Time>
Persistence time if persistence is active (see
).
Each new data point in the diagram area remains on the screen for the duration
defined here. To set infinite persistence, use
Parameters:
<Time>
Range:
50E-3 to infinite
*RST:
50E-3
Default unit: s
DISPlay:PERSistence:INFinite
<InfPersistence>
Sets the persistence time to infinite if
new data point remains on the screen infinitely until this setting is changed or the per-
sistence is cleared.
Display