![background image](http://html1.mh-extra.com/html/rands/rtc1k-com2/rtc1k-com2_user-manual_3178337229.webp)
Remote Commands Reference
R&S
®
RTC1000
229
User Manual 1335.7352.02 ─ 04
Parameters:
<RelativeMode>
TEN | TWENty
TEN
10/90%
TWENty
20/80%
*RST:
TEN
Example:
REFL2:REL:MODE TWENty
MEAS2:MAIN RTIM
Sets the reference level for measurement place 2 and measures
the rise time between these levels:
Lower reference level = 20% of high signal level
Upper reference level = 80% of high signal level
13.7
Quickmath and Reference Waveforms
.......................................................................................... 232
13.7.1
Quickmath
This chapter describes commands that configure or perform basic math functions using
Quickmath.
...............................................................................................229
........................................................................................... 230
........................................................................................230
..............................................................................................230
........................................................................................... 230
..............................................................................................230
................................................................................. 231
CALCulate:QMATh:DATA:XINCrement?
........................................................................... 231
.................................................................................231
CALCulate:QMATh:DATA:YINCrement?
........................................................................... 231
.................................................................................232
CALCulate:QMATh:DATA:YRESolutiont?
..........................................................................232
CALCulate:QMATh:STATe
<State>
Defines whether the Quickmath waveform is active or not. Only if a channel is active it
is visible on the screen and can be selected as a source for analysis and display func-
tions. Quickmath is only available in YT and Zoom mode.
Parameters:
<State>
ON | OFF
*RST:
OFF
Quickmath and Reference Waveforms