![background image](http://html1.mh-extra.com/html/rands/rtc1k-com2/rtc1k-com2_user-manual_3178337174.webp)
Remote Commands Reference
R&S
®
RTC1000
174
User Manual 1335.7352.02 ─ 04
TIMebase:REFerence
<ReferencePoint>
Sets the reference point of the time scale (Time Reference) in % of the display. The
reference point defines which part of the waveform is shown.
See also:
Parameters:
<ReferencePoint>
Range:
10 to 90
*RST:
50
Default unit: %
13.3.3
Acquisition
..............................................................................................175
....................................................................................... 175
...............................................................................................176
.............................................................................................177
................................................................................................ 177
........................................................................................... 178
................................................................................................178
AUToscale
Performs an autoset process: analyzes the enabled channel signals, and obtains
appropriate horizontal, vertical, and trigger settings to display stable waveforms.
Usage:
Event
Asynchronous command
ACQuire:MODE
<AcquisitionMode>
Selects the method of adding waveform points to the samples of the ADC in order to fill
the record length.
Acquisition and Setup