![background image](http://html1.mh-extra.com/html/rands/rtc1k-com2/rtc1k-com2_user-manual_3178337269.webp)
Remote Commands Reference
R&S
®
RTC1000
269
User Manual 1335.7352.02 ─ 04
BUS<b>:CPARallel:CS:POLarity
<Polarity>
Selects wether the chip select signal is high active (high = 1) or low active (low = 1).
Suffix:
<b>
.
1, 2
Selects the bus.
Parameters:
<Polarity>
POSitive | NEGative
POSitive
high active
NEGative
low active
BUS<b>:CPARallel:WIDTh
<BusWidth>
Sets the number of lines to be analyzed.
Suffix:
<b>
.
1, 2
Selects the bus.
Parameters:
<BusWidth>
Range:
1 to 6
Increment: 1
*RST:
6
Default unit: Bit
13.16.3
SPI Bus
................................................................................................269
13.16.3.1
SPI - Configuration
...............................................................................................269
............................................................................................... 270
.........................................................................................270
.........................................................................................270
........................................................................................... 271
........................................................................................... 271
BUS<b>:SPI:CS:SOURce
<Source>
Selects the input channel of the chip select line.
Protocol Analysis