Documenting Results
R&S
®
RTC1000
105
User Manual 1335.7352.02 ─ 04
3. Press "PAPER FORMAT". Select the required format using the [Universal] knob.
4. Press "COLOR MODE".
6. To select the printer language that is used by your printer, press "COMMAND
SET".
The following printer languages are supported:
● PCL-5
● PCL-XL (= PCL-6)
● Postscript
To start the printout
Infrequent printouts can be started from the "File" menu.
1. Make sure that the printer is configured correctly.
See:
"To configure the printer output"
2. Press the [SAVE/RECALL] key.
3. Press "SCREENSHOTS" > "PRINT".
To use quick print with the [FILE/PRINT] key
If you assign the print function to the [FILE/PRINT] key, a screenshot is printed on the
connected printer when you press the [FILE/PRINT] key.
1. Configure the [FILE/PRINT] key:
a) Press [SAVE/RECALL] > "KEY".
b) Press "SCREENSHOTS".
2. Make sure that the printer is configured correctly.
See:
"To configure the printer output"
3. Press the [FILE/PRINT] key.
8.5
Quick Access with FILE/PRINT Key
The [FILE/PRINT] key is a shortcut key that initiates the associated action. With this
key, it is easy to print screenshots to a connected printer, or to save data to a specified
storage location just by pressing a single key.
1. Press the [SAVE/RECALL] key.
2. Press the "KEY" softkey.
3. Press the softkey of the required operation:
● "DEVICE SETTINGS": Stores instrument settings
● "TRACES": Stores waveforms
Quick Access with FILE/PRINT Key