Remote commands for Multi CISPR APD measurements
R&S
®
ESW-K58
82
User Manual 1179.0880.02 ─ 03
OUTPut
Port works as an output.
*RST:
INPut
Manual operation:
See
8.5.6
Measurement settings
Useful commands to configure measurements described elsewhere:
●
.................................................................................... 82
.....................................................................................82
.............................................................................................. 83
..............................................................................................83
[SENSe:]BANDwidth[:RESolution]
..................................................................................... 83
[SENSe:]MAPD:CHANnel<n>:POPulate
.............................................................................84
[SENSe:]MAPD[:STANdard]:LOAD
<FileName>
Loads a measurement configuration. Standard definitions are stored in an xml file. The
default directory for Multi CISPR APD standards is
<SYSTEM_ROOT>\predefined\MultiApd\
.
If you have stored the file in a subdirectory of the directory mentioned above, you have
to include the relative path to the file.
Parameters:
<FileName>
String containing the file name
Example:
MAPD:LOAD “CISPR_Ed.6.2.xml”
Manual operation:
See
[SENSe:]MAPD[:STANdard]:SAVE
<FileName>
Saves the current configuration to a standard file. Standard definitions are stored in an
xml file. The default directory for Multi CISPR APD standards is
<USER_ROOT>\predefined\MultiApd\
.
If you have stored the file in a subdirectory of the directory mentioned above, you have
to include the relative path to the file.
Parameters:
<FileName>
String containing the file name
Example:
MAPD:SAVe “MyFile.xml”
Manual operation:
See
Configuration
