R&S ESW-K58, User Manual

Page: 36 / 103

Configuration
R&S
®
ESW-K58
36 User Manual 1179.0880.02 ─ 03
5.7 Evaluation table
Access : "Meas Config" > "Evaluation Settings"
The remote commands required to define these settings are described in Chap-
ter 8.5.7, "Evaluation table" , on page 84.
Evaluation Table
The evaluation table is populated by pressing the Populate All Channels to Evaluation
Settings button in the Measurement Settings tab.
If parameters in the measurement settings are changed in a way that they no longer
correspond to the limit table, the corresponding column in the table is grayed out.
Evaluation Turns the evaluation on and off.
Insert Left Inserts a new column on the left side of the selected column.
Insert Right Inserts a new column on the right side of the selected column.
Delete Deletes the selected column.
Load Table Loads an existing table from an XML file in the specified location. The
default path is
<USER_ROOT>\MultiApd
.
Save Table Saves the table in XML format to the specified location. The default
path is
<USER_ROOT>\MultiApd
.
Clear Table Clears all columns except for the one at center frequency from the
table.
Generate Eval-
uation Table
from Measure-
ment Settings See "Measurement Settings" on page 35.
Remote command:
[SENSe:]MAPD:CHANnel<n>:CLEar
on page 84
[SENSe:]MAPD:CHANnel<n>:COUNt?
on page 85
Evaluation table