EB200 Manual
Remote control
4052.2000.02 4.13
E-7
4.5 Description of commands
Note: For overview of commands see tables in Annex C.
4.5.1 Notation
In the following sections, all commands implemented in the device are described in detail. The notation
corresponds to a large extent to that of the SCPI standards. The SCPI conformity information can be
taken from the list of commands in Annex C.
Indentations
The different levels of the SCPI command hierarchy are represented in the
description by means of indentations to the right. The lower the level is, the
further is the indentation to the right. Please observe that the complete
notation of the command always includes the higher levels as well.
Example:
SENSe:FREQuency:MODE
is indicated in the description as follows:
SENSe
first level
. :FREQuency
second
level
. . :MODE
third
level
Upper-/lower-case notation
Upper/lower-case letters serve to mark the long or short form of the key
words of a command in the description (see next section). The device itself
does not distinguish between upper- and lower-case letters.
