EB200 Manual
Maintenance and Troubleshooting
4052.2000.02 5.3
E-7.1
5.2.2 Error messages
Error message
Cause
Module
Backup LI-Battery low
The lithium backup battery for storing parameters in
the CMOS RAM is dead.
LI-battery
DC Converter defective
The DC/DC converter indicates an error.
A11
DSP IF Section defective
The IF section (EB200Z1) indicates an error.
A8
Front Panel defective
The front panel control unit (EB200F1) indicates an
error.
A3
Frontend defective
The standard frontend indicates an error.
A7
Frontend1 defective
The standard frontend indicates an error.
A7
Frontend2 defective
The standard frontend indicates an error.
A7
IF Panorama defective
The IF panorama module (EB200SU) indicates an
error. The EB200SU is optional.
A9
IF Prefilter narrow defective
The IF section (EB200Z1) indicates an error.
A8
IF Prefilter wide defective
The IF section (EB200Z1) indicates an error.
A8
IF Section defective
The IF section (EB200Z1) indicates an error.
A8
Preselector 20..80 MHz defective
The preselection (EB200V1) indicates an error.
A6
Preselector 80..200 MHz defective
The preselection (EB200V1) indicates an error.
A6
Preselector 200..650 MHz defective
The preselection (EB200V1) indicates an error.
A6
Preselector 650..1500 MHz defective
The preselection (EB200V1) indicates an error.
A6
Preselector 1500..3000 MHz defective
The preselection (EB200V1) indicates an error.
A6
Preselector defective
The preselection (EB200V1) indicates an error.
A6
Remote Interface defective
The remote control interface (eg EB200R2) indicates
an error.
A12
Testgenerator defective
The preselection (EB200V1) indicates an error.
A6