RAMMER 1533E Operator'S Manual Download | Manualshive

Page: 36 / 74

background image

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY

Page 36 - Operation

Operation

1533E STD

5.3 MOUNTING AND DISMOUNTING THE HAMMER

REMOVAL FROM CARRIER

Warning! The hammer must be secured from rolling over when disconnecting
from the carrier. Only use a skilled operator to position the carrier for hammer
removal!

Warning! Hydraulic pressure inside the hammer must always be released
before opening hose connections!

Warning! Hot hydraulic fluid can cause severe injuries!

1. Position hammer horizontally on the floor. If the hammer is going to service,

remove the tool.

2. Stop the carrier engine. Operate boom and hammer controls to release pressure

trapped inside hoses. Wait ten minutes for oil pressure to drop.

3. Close hammer inlet and outlet lines. If quick couplers are used, disconnection

automatically closes hammer lines. If hammer line includes ball valves, please
make sure that they are closed.

4. Disconnect hoses.

NOTICE! Protect environment from oil spills

. Plug the

hoses and the hammer inlet and outlet ports to keep dirt out from hydraulic
circuit.

5. Remove bucket pins and other parts.

«
...
34
35
36
37
38
...
»

Summary of Contents for 1533E











































































Reviews:

No comments

Related manuals for 1533E

Brand: EGAmaster Pages: 10

Brand: Max Pages: 87

Weller Pyropen Jr.

Brand: Cooper Hand Tools Pages: 31

Brand: HARTING Pages: 2

Brand: Laguna Tools Pages: 9

Brand: Senco Pages: 46

Universal CPU Holder

Brand: Ergotron Pages: 14

Brand: Omer Pages: 2

Brand: Bench Dogs Pages: 5

Brand: Westfalia Pages: 46

MajorSlice 350A

Brand: Rice Lake Pages: 2

Brand: Triton Pages: 72

Brand: YATO Pages: 64

Brand: U-Line Pages: 21

Brand: YATO Pages: 4

Brand: Park Tool Pages: 2

Brand: Zhongdi Pages: 4

Brand: Makita Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands